How Can I Finish My Basement Cheaply?

You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring , says Buckeye Basements’ Jon Smith. Beyond that, count on using some pros.

Can you finish a basement for 5000?

average cost to Remodel a Basement Remodeling a basement costs $5,000-$10,000 on average , so you can easily finish your basement for $10,000 or less.

Can I finish a basement myself?

Install Utilities Safety Tip: This work is strictly regulated, and should not be DIYed Even if you plan on finishing the rest of your basement yourself, you’ll need to hire a certified professional for this part of the project.

How much does it cost to finish a $2 000 sq ft basement?

Finishing a 2,000-square-foot basement costs approximately $70,000 to finish. Find the best basement finishing contractor in your neighborhood.

What can I use for basement walls instead of drywall?

  • Paint.
  • Basement Panels.
  • wood fiberboard.
  • Fabric.
  • Vinyl and Wallpaper.
  • Stone Veneer.
  • Pargeting.
  • Exposed Brick.

How much does it cost to put drywall in a basement?

Cost to Drywall a Basement Installing drywall costs an average of $1,850 or about $2 per square foot Finishing basement walls in a 400 square foot space may run you $800, while 1,500 square feet is closer to $3,000.

Is finishing basement a good investment?

Great Return on Investment In the United States, on average, finishing a basement will give you a return of 70 to 75% of your investment. For example, if you spent $1,000 on improvements, it would increase the value of the property by about $700.

Is it OK to paint basement concrete walls?

I am talking about do not paint your foundation walls like concrete, brick, and block Remember, most foundation walls allow lots of moisture and humidity into your basement. Many paints are not strong enough to hold back the hydrostatic pressure.

What should I put on my basement walls?

  • ZenWall Panels. ZenWall panels have an insulated ocre and reflective backing
  • BrightWall Paneling
  • CleanSpace Wall System
  • Foamax
  • Basement to Beautiful Panels
  • Total Basement Finishing EverLast Wall Panels.

What is a Yankee basement?

A Yankee basement is a root cellar The name for the space comes from the dugout in baseball, which is the area where teams have their benches located in foul territory.

In what order should I finish my basement?

  • Step 1: Decide How You Want to Use Your Basement.
  • Step 2: Draft a Detailed Basement Floor Plan.
  • Step 3: Look for Signs of Moisture in Your Basement.
  • Step 4: Do a Basement Inspection.
  • Step 5: Consider Your Electrical and Plumbing Needs.
  • Step 6: Choose Your Basement Insulation.

How long does it take to finish a 1000 sq ft basement?

The time span for a basement finishing project depends on several factors—the project size, the contractor’s reliability, etc. An average of 1000 square feet basement takes around four weeks to finish.

How much does framing a basement cost?

It costs an average of $1,200 to frame a basement, with a typical range of between $500 and $1,600 It can cost as little as $250 to frame a small basement and as much as $4,000 for a large one. There are three types of basements: masonry wall, poured concrete, and precast panel.

How do you make an unfinished basement look finished?

The best way to make your unfinished basement feel complete is by adding accents and decor just as you would to any other room in your house In addition to the basement ideas above, like hanging string lights and adding area rugs, bring in other details that will add warmth, texture, and ambiance.

How hard is it to frame a basement?

Framing basement walls is the first phase of learning how to finish a basement. I do love the smell of lumber dust on a cool fall morning. Don’t worry, it’s not as hard as it looks, but it’s one of the steeper learning curves Once you get the basic concepts down it’s just rinse and repeat.

What can I put on my basement concrete walls?

The most common way to cover concrete walls in a basement is drywall, a.k.a. sheetrock Drywall comes in panels panels made from calcium sulfate dihydrate or “gypsum.” Panels come in different thicknesses and sizes, the most common being 4′ x 8′ x 1/2″ thick.

How much does it cost to put a ceiling in a basement?

Raising a basement ceiling typically costs about $19,200 and can range from $16,000 to $24,000 During this process, the house is lifted and the foundation is raised to a new level.

How much does it cost to pour a 1000 square foot basement?

It will cost you about $20,000 on average to pour a concrete basement yourself, with a typical range of between $16,000 and $24,000. If you’re doing a smaller basement of about 1,000 square feet and spending on the low end for materials prices, it may only cost you $4,000 to $6,000 to get the job done yourself.

What type of drywall is best for basements?

Due to the often damp conditions of the basement, be sure to choose sheetrock that is at least moisture-resistant (often call greenboard) but be on the lookout for products that are specifically resistant to mold and mildew (some kinds of purple board).

How much does it cost to add a bathroom in a basement?

Adding a bathroom in a basement costs $8,000 to $15,000 on average. You’ll save $500 to $1,000 if you have a rough-in drain already in place – typical in newer homes and usually near the main drain line.

What to Know Before finishing a basement?

  • Check the Foundation. Before starting any construction in your basement, assess the state of the foundation
  • Identify Code Violations
  • Eliminate Water Issues
  • Insulate Properly
  • Assess the Ceiling
  • Work Around the Essentials in Your Design.

Can I waterproof my basement myself?

DO apply a masonry waterproofing product to bare interior basement walls If your foil test showed that water is soaking through your basement walls and leaving them wet, seal the interior of the walls with a high-quality waterproof paint, such as DRYLOK White Extreme Waterproofer (available from Home Depot).

What does partially finished basement mean?

A partially finished basement has finished and unfinished areas For instance, many people will have a fully finished living area and maybe a bedroom or half bathroom in their basement. These areas will have fully finished walls, floors, and ceilings with all utilities done correctly.

How much does it cost to add a half bathroom in the basement?

A half bath installed in the basement provides a more conveniently located bathroom out of the usual foot traffic. Also, the average cost to add a basement is around $10-15,000 However, if you add the basement under an existing bathroom, you can save anywhere between $1-2,000 in plumbing expenses.

Can you finish basement walls without drywall?

Use furring strips attached to basement walls: basement panels can be used in a basement finish not using studs and drywall As such, all you need for support are some furring strips attached to basement concrete side walls.

Is shiplap cheaper than drywall?

Cost and Installation Drywall panels are cheaper than shiplap per sq. ft., but once you factor in the cost of installation, shiplap usually comes out ahead as the more budget-friendly option. What is this? The average price for drywall is $15 per 4-by-8 foot panel or around $2.15 per sq.

Is there anything cheaper than drywall?

Plywood and Sheet Wood Plywood is the cheapest alternative to drywall on this list and allows you to finish a room with a certain flair without taking on the expenses of wood planks, veneer or drywall.

How much does it cost to drywall 1000 square feet?

The national average cost to install drywall is between $1,600 and $3,500, with most homeowners spending around $2,000 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel. At the low end, you can install 500 sq.

What do drywall finishers charge?

The cost of finishing drywall is typically in the range of $1.00 to $1.65 per square foot , not including labor. For an average 12′ x 12′ room (144 square feet), those costs would translate into a drywall finishing cost of anywhere from $144 to $238.

Why don’t people finish their basements?

Some just want the room to act as extra storage or utility room that won’t need as much attention as other rooms It could also be that a homeowner wants to leave a basement incomplete to pave way for its customization. Such a basement will remain incomplete until the owner is ready to start the redesign process.

What is the best flooring for a basement?

The best type of flooring for basements is vinyl. Vinyl flooring can come in the form of vinyl plank and vinyl tile, giving it the ability to look nearly identical to hardwood and stone products with the added benefit of being waterproof. Vinyl flooring is made of PVC making it durable and waterproof.

Does adding a bathroom in the basement add value?

Adding a basement bathroom can increase your home’s resale value by 10%-20% It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.

How can I make my concrete basement walls look better?

  • using drywall and paint to cover concrete walls
  • painting the concrete or block wall
  • Brick veneer panels for basement walls
  • cover your walls with real barnboards
  • combination weathered wood and painted drywall
  • use wallpaper to finish your basement walls.

Should I seal basement walls before finishing?

Nothing will ruin a beautiful remodeling job like soaked carpets, moldy drywall and damaged furniture so it is essential that a basement be fully waterproofed before any finishing work begins.

Should you Drylock basement walls?

Of course, the reason you need to seal any basement foundation is because the foundation is porous. Moisture can come through the concrete, stone or block and cause a lot of problems under the house so sealing it is an integral part of the process in making sure your basement is clean and dry.

What should I put between drywall and concrete?

The solution is covering concrete with a vapor barrier , which acts like a resistant cell membrane instead. With a shield in place, the drywall is safe. Typically, a stud wall is then installed against the concrete, but furring strips are quick, easy and take up less space.

Can I seal my basement from the inside?

Waterproofing a basement in the inside is a very popular option because it is done without major exterior excavation and, in some cases, can be done very quickly and economically.

Can you put drywall directly on concrete?

You can glue drywall sheets to a concrete block wall Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. However, in some installations, such as in a basement, it is necessary to glue drywall sheets to the interior of concrete block walls.

What is a Texas basement?

A Texas Basement is floored attic space that is typically accessible via a hallway or closet on the second floor In some homes, the Texas Basement is accessible via a separate stairways in the garage and the floored attic space is the space above the garage.

What is a 1/2 basement?

In architecture, a semi-basement is a floor of a building that is half below ground, rather than entirely such as a true basement or cellar.

Why is it called a Michigan basement?

You might not know it by name, but you have probably seen a Michigan basement. A Michigan basement is a term used in and around Michigan for a crawlspace that was later excavated to the depth of a basement.